Punching Full-Page Designs with a 12x12 Template

The February template has two full-page designs, a large flower and a frame, one on each half of the template. A big advantage to using a template instead of a prepunched design is that you can punch just the portions of the design that you want, and you can punch it through multiple layers.

1. Position Template
Align the template with the left and right edges of a 12x12 page, and center the design on the page.

2. Trace Holes
 Trace each hole of the desired design.

3. Flip and Repeat
Flip the template over to the back and line up the design with the other paper edge. Trace each hole of the desired design again.

4. Punch Holes
Use an Anywhere Punch or other punch that reaches to the middle of the page and punch each of the holes you marked. Now you have a full-page design ready to fill with stitches or brads!